Replacement Liner Baffin Hunter L8562A40

Reference BAHUL

In stock: Ships within 48 hours

€42.90 TTC

POINTURES

Tarif dégressif dès 2 pièces 39,47 € · dès 10 35,18 €

1 pièce	2	3 à 4	5 à 9	10 à 24	25 à 49	50 à 99	100 et +
42,90 €	39,47 €	37,75 €	36,47 €	35,18 €	33,89 €	32,60 €	31,32 €

Prix unitaire TTC — les quantités se cumulent entre tailles et couleurs de ce produit.

Besoin de quantités supplémentaires ou d’une personnalisation ? Demandez un devis

Satisfied or refunded

Secure payment

SUMMARY

Genuine Baffin replacement inner liner, reference L8562A40, for the Hunter boots. Same 3-layer Tri-Fit system as the factory fit: PolyWick™ lining, high-density insulation layer and vaporised aluminium membrane. Removable, hand washable. Sold in pairs, white, EUR sizes 39 to 47.

TECHNICAL DESCRIPTION

Replacement Liner Baffin Hunter – Tri-Fit

Protection Extreme Cold

Height 30.5 cm (12 in)

Insulation 3-layer Tri-Fit

Protection temperature down to −40 °C / −40 °F*

Sizes EUR 39 to 47

Sold in pairs Genuine Tri-Fit liner

The genuine liner for the Hunter

In a moulded boot, the shell lasts years: it is the liner that wears out. This one carries the same Tri-Fit system as the factory fit on the Hunter, in three layers with distinct jobs — a PolyWick™ lining that transfers moisture and evaporates it outside the fabric, a high-density insulation layer, and a vaporised aluminium membrane that reflects energy back to the foot. It slides into the boot with no adaptation, lifts out to dry, and washes by hand. Sold in pairs, white, EUR sizes 39 to 47.

The Grand-Froid expert view

A moulded boot is completely waterproof, and that is exactly what makes its liner decisive: nothing clears through the upper, no vapour passes through the rubber. All the perspiration produced during the day stays inside, and the only way to get it out is to take the liner out in the evening. It is also why the liner ages faster than the shell: it takes, day after day, everything the boot will not let through. Replacing it restores the original comfort temperature without touching a shell that has lost nothing at all.

What is it for?

This liner is for Hunter owners, in several situations.

Replacement after wear: when the boot is still sound but the inside has packed down and no longer holds the original temperature
Second set in rotation: a dry liner every morning, without waiting for overnight drying — the arrangement for jobs in continuous cold
Daily professional wear: six to ten hours a day in a waterproof boot, where damp has no other way out
All-season use: the liner comes out so the boot can be worn outside the cold months
Adjusting the fit: a new liner takes back volume, useful once the previous one has ended up loose

Thermal protection

The Tri-Fit system spreads three functions across three layers. Against the foot, the PolyWick™ lining picks up perspiration and carries it to the outside of the fabric, where it evaporates: that is the layer that decides whether the insulation stays dry. Above it, a high-density insulation layer traps air, which is the real insulator — it is not the thickness of the material that keeps you warm, but the volume of air it holds. On the surface, a vaporised aluminium membrane reflects the energy the foot gives off back towards it, rather than letting it disappear into the shell. It is this assembly that degrades with use: the fibre packs down under body weight, the volume of air falls, and the comfort temperature rises without anything showing.

Size guide

Take the size of the boot to be fitted. The conversion is the Baffin industrial grid, the same one used for the Hunter.

EUR	US	UK	cm
39	6	5	24
40	7	6	25
41	8	7	26
42	9	8	27
43	10	9	28
44	11	10	29
45	12	11	30
46	13	12	31
47	14	13	32

For a half size, go up to the size above. The liner feels tight on first use: the insulating layers mould to the foot after a few hours of wear, so try it around the house before a full day out.

Technical features

3-layer Tri-Fit liner, same build as the factory fit
Made for the Hunter — manufacturer reference L8562A40
Removable: lifts out and goes back in with no tools and no adaptation
Height 30.5 cm (12 in), length 29.8 cm (11.75 in), width 10.8 cm (4.25 in)
Weight 0.30 kg (0.67 lb) per pair
Hand washable, warm water, mild detergent and a brush
Sold in pairs, white
Sizes EUR 39 to 47 (US 6 to 14)

Composition

Inner layer: PolyWick™ lining, moisture transfer and evaporation outside the fabric
Insulation: high-density layer
Reflection: vaporised aluminium membrane

How to fit it

Three steps, no tools.

Take out the old liner: pull from the collar, without forcing on the heel
Check inside the shell: clear out sand, grit or residual damp before fitting
Feed the new liner in heel first, then unfold the collar to shaft height and put the boot on

Care & Durability

Wash in warm water with a mild detergent and a soft brush
No machine wash, no spin, no tumble dryer: the structure of the fibre does not recover from it
Dry in open air, away from any direct heat source
Take the liner out of the boot after each day worn: in a moulded boot, that is the only way to clear the damp
Before storing, check the liner is completely dry, then keep it somewhere dark, dry and cool, without compression

Return or exchange — 30 days

You have 30 days from delivery to request a return or an exchange on this item.

Why replace a liner?

Because a work boot is not judged by the state of its shell. The rubber and the outsole last years; the inside takes perspiration, compression and body heat every single day. Replacing the part that wears rather than the whole boot extends the working life of the equipment and restores the original comfort temperature.

Three signs the time has come:

The boot has become less warm: the insulation has packed down under body weight and the volume of air, which is the real insulator, has fallen without the apparent thickness changing
The foot moves around: the liner no longer returns to shape, hold is lost and pockets of cold air appear at the heel
Damp no longer clears: the liner is still lukewarm in the morning after a night of drying, a sign that the transfer layer has reached its limit

A new liner in a sound shell is worth a new boot, for a fraction of the budget.

* Indicative temperature. Perceived warmth varies with activity, body type, humidity, wind, length of exposure and the socks worn.