Women's 3-in-1 Waterproof Recycled Jacket Zip-in Fleece -20°C – James & Nicholson JN1377

Reference CY1377

Shipping within 2/3 days

€96.58 excl. VAT

Tarif dégressif dès 2 pièces 88,85 € · dès 10 79,20 €

1 pièce	2	3 à 4	5 à 9	10 à 24	25 à 49	50 à 99	100 et +
96,58 €	88,85 €	84,99 €	82,09 €	79,20 €	76,30 €	73,40 €	70,50 €

Prix unitaire TTC — les quantités se cumulent entre tailles et couleurs de ce produit.

Besoin de quantités supplémentaires ou d’une personnalisation ? Demandez un devis

Satisfied or refunded

Secure payment

SUMMARY

Women's 3-in-1 jacket: a 10,000 mm waterproof outer jacket with sealed seams and zips, breathable at 5,000 g/m²/24 h, and a detachable inner jacket in recycled fleece with a quilted SUGENRO® front panel, wearable on its own. Slightly fitted cut, sizes XS to XXL, recycled polyester from PET bottles.

TECHNICAL DESCRIPTION

Women's Severe Cold 3-in-1 Jacket JN1377 — James & Nicholson

Protection Severe Cold

Waterproofing 10,000 mm

Insulation SUGENRO® + fleece

Thermal protection Down to −20 °C*

Detachable inner jacket Three jackets in one

A 10,000 mm waterproof outer jacket and a quilted inner jacket, worn together or apart

On a building site or in outdoor logistics, the weather and the intensity of the work change all day long. The JN1377 women's 3-in-1 jacket answers that by detaching its lining. The outer jacket is waterproof to 10,000 mm, with sealed seams, waterproof zips, a two-way zip with an inner storm flap, an adjustable drawcord hood and a stand-up collar with a chin guard — and it moves 5,000 g of vapour per m² over 24 hours, which matters as much as the waterproofing once you start working hard. The detachable inner jacket is not a plain fleece: it is a hybrid, recycled polyester fleece with a quilted SUGENRO® front panel, wearable on its own. The whole garment is recycled polyester made from PET bottles.

The Grand-Froid expert view

Modularity is the real argument: the jacket alone when the effort picks up, the liner alone indoors or in a vehicle, both together the moment you stop. The SUGENRO® quilting sits at the front, where the wind hits — the back stays fleece, and you feel it if you stand still with your back to the wind. The cut is fitted: little dead air to heat, but little room for a thick layer underneath. At 10,000 mm the jacket holds a long downpour, not just a shower.

James & Nicholson JN1377 women's 3-in-1 jacket, recycled waterproof outer jacket with detachable quilted inner jacket

What is it for?

It suits work where the weather and the effort both change within the same day.

Building sites and outdoor works: in steady rain the outer jacket takes over from the warm layer
Site management and supervision: posts that alternate walking and standing, where you overheat then cool down
Logistics, handling and outdoor loading bays: repeated trips from outside to inside
Patrols and exposed call-outs: rain, wind and cold across long rounds
Commuting and winter outdoor wear: one jacket for the whole season instead of two in the boot

This garment is not personal protective equipment. It does not replace regulation workwear where the law requires it.

Thermal protection

The −20 °C* figure applies with both jackets assembled: it is the combination that protects, not either half. The inner jacket supplies the warmth — the fleece traps air between its fibres, and the quilted SUGENRO® panel adds light insulation across the front of the body. The outer jacket does not warm you: it stops the wind carrying the warm air away and the rain wetting the insulation, which would then lose most of its effect. That is why the two together are worth far more than the two apart. Under the liner, a synthetic or merino wool base layer moves perspiration away; a cotton T-shirt holds it against the skin and chills you the moment you stop.

The three ways to wear it

Outer jacket alone — hard work, wet mid-season: waterproof and windproof, moving vapour out while you work, without the liner's warmth
Inner jacket alone — indoors, in a vehicle, cool weather: fleece and quilting, wearable as it is. It has no hood: outdoors, your head is uncovered
Both assembled — static work, severe cold: the configuration the −20 °C* figure refers to

Technical specification

Outer jacket

Waterproofing: 10,000 mm water column, sealed seams, and every zip waterproof
Breathability: 5,000 g of vapour moved per m² over 24 hours
Two-way zip with an inner storm flap, opening from the bottom so you can sit or bend without uncovering your body
Stand-up collar with chin guard
Adjustable hood with drawcord
Storage: 2 zipped side pockets, 1 zipped chest pocket, 1 inner pocket
Slightly fitted cut, two-tone finish

Detachable inner jacket

Hybrid construction: recycled polyester fleece with a quilted SUGENRO® panel at the front
No hood, wearable on its own
Storage: 2 zipped side pockets, 2 open inner pockets

Composition

Outer jacket: 100% recycled polyester
Lining: 100% polyester
Inner jacket, fleece: 100% recycled polyester
Inner jacket, quilting: 95% recycled polyester, 5% elastane
Fabric weight: 158 gsm

The recycled polyester comes from PET bottles. Slight variations in shade are normal on a recycled fabric.

Size guide

Slightly fitted cut. Both jackets are sold together in the same size: take your usual size, and one size up only if you plan to add a thick mid layer on top of the liner. The measurements below are those of the garment laid flat, not body measurements.

Measurement (cm)	XS	S	M	L	XL	XXL
HALF CHEST	50	53	56	59	62	65
HALF WAIST WIDTH	47	50	53	56	59	62
HALF HEM WIDTH	52	55	58	61	64	67
FRONT LENGTH from the shoulder	66	67	69	71	73	75
BACK LENGTH from the shoulder	69	70	72	74	76	78
SLEEVE LENGTH	61.5	62.5	63.5	64.5	64.5	65.5

Measurements in cm, taken flat. Tolerance up to ± 1 cm.

The half chest increases by three centimetres per size, the length by two at most. It is therefore the half chest that decides your size. Sleeve length is identical on L and XL: between those two sizes it is the body width that changes, not the sleeve.

Care & durability

⚠ [MISSING DATA] — wash temperature: the supplier data sheet gives a moderate cycle without stating a temperature; to be read from the garment label

Machine wash, moderate cycle
Do not bleach
Do not tumble dry
Do not iron — polyester glazes and distorts against direct heat
Do not dry clean
Detach the inner jacket before washing: the two jackets wash separately, and the assembly fasteners damage the fleece in the drum
Close the zips before washing: open teeth catch the fleece knit and tear it
Wash without fabric softener: the fleece then keeps the pile that traps air, and so the warmth
Dry in the open air on a hanger: sharp creases crush the knit where it is folded

Commitments

Recycled fabric: recycled polyester from PET bottles, compliant with the Global Recycled Standard
SUGENRO® insulation: recycled polyester fibres, light and durable insulation
REACH: compliant with European chemicals regulation

Returns and exchanges — 30 days

You have 30 days from delivery to request a return or an exchange on this item.

Why choose this 3-in-1 jacket?

Because it covers three configurations in a single purchase, and none of the three is a compromise. An outer jacket waterproof to 10,000 mm and breathable at 5,000 g for working in the rain. A quilted fleece jacket for sheltered posts. And both assembled down to −20 °C*, in recycled polyester inside and out.

The three-layer system:

1st layer — base: next to the skin, not supplied. A synthetic or merino wool base layer moves perspiration away; cotton holds it and chills you when you stop.
2nd layer — the detachable inner jacket: fleece and SUGENRO® quilting, it produces the warmth of the system.
3rd layer — the outer jacket: it does not warm you, it protects the second layer from wind and water, without which the insulation stops working.

A modular jacket is judged not by its warmest configuration, but by how fast you can move from one to the next.

* Indicative temperature, with both jackets assembled. Perceived warmth varies with activity, build, humidity, wind and the layers worn underneath.