Fur-Lined Winter Safety Ankle Boot CXS Nickel S3

Reference CA2310001

In stock: Ships within 48 hours

€59.92 TTC

Shipping 24/48 H

Select colors

Black

POINTURES

Tarif dégressif dès 2 pièces 52,13 € · dès 10 45,54 €

1 pièce	2	3 à 4	5 à 9	10 à 24	25 à 49	50 à 99	100 et +
59,92 €	52,13 €	50,33 €	47,94 €	45,54 €	43,14 €	40,75 €	38,35 €

Prix unitaire TTC — les quantités se cumulent entre tailles et couleurs de ce produit.

Besoin de quantités supplémentaires ou d’une personnalisation ? Demandez un devis

Satisfied or refunded

Secure payment

SUMMARY

The Nickel S3 is an ankle-height safety boot built for winter: 1.8 to 2 mm hydrophobic leather, a synthetic fur lining and a slip-resistant PU-PU outsole. It keeps the steel toe cap and steel midsole that S3 SRC calls for, and the ankle-height upper holds the joint and closes the way to snow. Sizes 38 to 48.

TECHNICAL DESCRIPTION

Winter Safety Ankle Boot Nickel S3 — CXS

Protection Cold

Safety S3 SRC

Lining Synthetic fur

Thermal protection −10 °C / 14 °F*

Synthetic fur lining S3 safety, in its winter version

An S3 safety boot with a fur lining, cut to the ankle

The Nickel S3 is the winter version of an ankle-height safety boot. The upper is hydrophobic grain leather, 1.8 to 2 mm thick, enough to stand up to slush and a muddy site. Inside, a breathable textile lining filled with synthetic fur wraps the foot and the ankle. It keeps everything the S3 class calls for: a steel toe cap rated to a 200 joule impact, a steel penetration-resistant midsole, antistatic properties and energy absorption at the heel. The dual-density PU-PU outsole resists oils and meets the SRC slip-resistance level. Added to that are a PU overcap across the front of the foot, which takes the knocks, and a reflective PVC strap. Sizes 38 to 48.

Grand-Froid expert's view

This is a winter safety boot: the full S3 protection, a lining and an ankle-height upper. The rest comes down to a good pair of socks and a size up.

What is it designed for?

This boot is for jobs where foot protection is required and the work is done in the cold, outdoors or in unheated premises.

Construction and civil engineering: concrete slabs, muddy or snow-covered ground, structural work in the cold season
Logistics and transport: loading bays, warehouse yards, moving between the cold and the covered areas
Industry and unheated workshops: long spells standing on concrete floors
Roadworks and grounds maintenance: early call-outs, frozen grass, waterlogged ground

Thermal protection

Cold reaches the foot by two routes: the damp that gets through, and the contact with the ground. The hydrophobic leather, 1.8 to 2 mm thick, answers the first — water and slush bead up instead of soaking in, and that is what the S3 letter requires of the upper. The synthetic fur lining answers the second: its fibres hold a layer of air around the foot and the ankle, and it is that still air that insulates. The PU-PU outsole adds its own thickness between the sole of the foot and the ground.

Technical specifications

Standard: EN ISO 20345:2011, class S3 SRC
Steel toe cap, rated to a 200 joule impact
Steel penetration-resistant midsole
Water-repellent upper, grain leather 1.8 to 2 mm
Breathable textile lining filled with synthetic fur
Dual-density PU-PU outsole, antistatic and oil resistant
SRC slip resistance, tested on soapy ceramic tile and on oiled steel
PU overcap across the front of the foot
Reflective PVC strap
Ankle-height upper, which holds the joint and closes the way to snow

Composition

Upper: smooth grain leather, water repellent, 1.8 to 2 mm
Lining: breathable textile filled with synthetic fur
Outsole: dual-density polyurethane (PU-PU)
Protective parts: steel

Size guide

European sizes, from 38 to 48.

Take one size up from your usual safety boots. Three reasons add up:

The fur lining already takes up part of the inside volume
You will be wearing mid-weight or heavy wool socks in them
The room left over lets you swap the sockliner for an insulating insole

That margin is not a comfort detail: a compressed foot cools down faster than one with air around it, and a boot that is too tight undoes the benefit of its lining.

Care & Durability

Brush off mud and soil after use, a soft brush and water are enough
Feed the leather regularly with a suitable wax or balm, so it keeps its suppleness and its water repellency
Dry at room temperature in an airy room, away from a radiator or a stove — direct heat cracks the leather and weakens the sole bonding
Take the sockliner out in the evening and leave the boot open, so the inside dries between two days
Alternate two pairs if you can: leather that dries out fully lasts considerably longer

Return or exchange — 30 days

You have 30 days after receipt to request a return or exchange for this item.

Why choose the Nickel S3 boot?

Because it avoids the usual winter trade-off: keeping your summer safety boots and being cold, or switching to a warm boot that no longer protects. Here the full S3 protection stays in place, with a lining and an ankle-height upper on top of it.

* Indicative temperature. Perceived warmth varies with activity, body type, humidity, the ground and the socks worn.